1X12(3+9) Window Regulator Steel Cord

The disassembly steps of the 1X12(3+9) Window Regulator Steel Cord are: 

1. Prepare the tools and remove the assembly on the door; 

2. Lift the glass up, the lifter will have screws to fix the glass, and unscrew the screws; 

3. , Unscrew the fixing screw of the lifter, and then take out the glass, and it must be tilted, otherwise it cannot be taken out; 

4. Unplug the wire, generally the end of the wire is on the inside of the door; 

5. Pull the wire to take out the glass lifter . Electric glass lifters for cars are mostly composed of motors, reducers, guide ropes, guide plates, glass mounting brackets, etc. The driver controls the opening and closing of all door and window glass, and the sub-switch on the inner handle of each door is controlled by the occupant to open and close each door and window glass, which is very convenient to operate.

Scope of application: steel wire ropes for manipulating various mechanical devices

Wire rope composition: 1X12(3+9)

Surface treatment: hot dip galvanized

performance: